RF-Conductor! Controller NIU Remote Configuration
Setting Transmitter Channels
This command is used to add, delete or re-configure transmitter channels.
1.
From the Site Encoding screen, use the
Set Transmitter Channels
Figure 7-4: Infrastructure Command Groups—Set Transmitter Channels
The Select Channel Options screen appears with three options (see Figure 7-5):
– Add channel: adds a channel to the existing map
– Delete channel: deletes one specified channel
– Re-configure channels: adds all channels. It replaces the current setting (0-7)
May 1998
to position the cursor to the left of the listing
<tab>
and press:
(see Figure 7-4).
<Return>
6880494G55-O
Site Encoding Commands
7-5