Table of Contents
Advertisement
RF-Conductor! Controller NIU Remote Configuration
Figure 3-2: Add Maintenance Group Menu
2.
Enter the Maintenance ID and press
63. If a new Maintenance ID matches an existing Maintenance ID in the monitor receiver,
it is overwritten.
3.
Enter the Air Delay and press
4.
Enter the Device ID that has this maintenance ID programmed. Valid values are 1-8191.
5.
Press
<Ctrl + e>
6.
To return to a previous menu or screen, press:
May 1998
<Return>
<Return>
to execute the command.
6880494G55-O
. The valid range of Maintenance IDs is 0-
. Valid values are 0-50000 in microseconds.
<Ctrl + p>
Alignment Commands
3-3
Advertisement
Table of Contents
