Motorola RF-Conductor! 3200 Manual page 9

RF-Conductor! Controller NIU Remote Configuration
Power Sources and Grounding: Connect the equipment to the type of power source
described in the installation instructions or as marked on the equipment. Take precautions to
avoid defeating the grounding or polarization provisions of the equipment. Disconnect the
power to the equipment by a circuit breaker when left unused for long periods of time.
Cleaning: Clean the outside of the equipment by using only a damp cloth. Do not immerse the
equipment in any type of liquid, including water. Do not use liquid cleaners or aerosol
cleaners. Dirt or other foreign matter should not be allowed to accumulate in the interior of
the enclosure.
Damage Requiring Service: Do not attempt to perform service functions that are not
described in the operating instructions. All other servicing should be referred to qualified
service personnel.
Telephone Line Installation: All telephone line connections to the equipment should be
accomplished with the telephone lines disconnected from the network interface.
Motorola is not responsible for static damage to equipment not sold under the Motorola logo.
©
Motorola, Inc. 1998. All rights reserved. Printed in the U.S.A.
May 1998 6880494G55-O
Foreword
vii