Figure 7-15: Select Station Id Screen - Motorola RF-Conductor! 3200 Manual

Site Encoding Commands

Figure 7-15: Select Station ID Screen

2. To add a station ID, position the cursor to the left of the listing
3. Enter the transmitter channel number to add and press:
values are 0-7.
4. Enter the station ID to add and press:
Station ID is 12. You must enter at least one character in the Station ID field.
5. Press
<ctrl +e>
6. To delete a station ID, position the cursor to the left of the listing
.
<Return>
7. Enter the transmitter channel number to delete the associated Station ID on that channel
and press:
7-16
to execute the command.
<Return>.
6880494G55-O
RF-Conductor! Controller NIU Remote Configuration
<Return>
The maximum characters allowed for
<Return>.
and press:
Add <Return>
(see Figure 7-16). Valid
and press:
Delete
May 1998
.