Figure 5-2: Diagnostics Screen-Select Auxiliary Outputs - Motorola RF-Conductor! 3200 Manual

RF-Conductor! Controller NIU Remote Configuration
Figure 5-2: Diagnostics Screen—Select Auxiliary Outputs
2. From the Diagnostic menu, use the
Auxiliary Output
Four auxiliary outputs are supported by an Internal NIU and two auxiliary outputs are
supported by an External NIU. If the unit is a hot standby controller then Auxiliary output 1 is
not changed by this command. Initially, all the auxiliary outputs are inactive.
3. Select Internal or External NIU. To select Internal NIU, position the cursor to the left of
the listing
The Internal NIU auxiliary output screen appears (Figure 5-3).
4. Press
<ctrl + t>
outputs.
5. Press
<ctrl + e>
May 1998
and press:
<Return
and press:
Internal NIU <Return>.
to toggle between n for no and y for yes for the four Internal NIU auxiliary
to execute the command.
6880494G55-O
to position the cursor to the left of the listing
<tab>
.
Diagnostic Commands
Set
5-3