RF-Conductor! Controller NIU Remote Configuration
Changing a Zone Map
This command is used to add or delete a Zone ID. Zone IDs range from 1 to 31, with 0
meaning all-call (that is, all transmitters have zero active by default). The use of Zone IDs
allows for multicasting of messages, for example, for page data distribution to multiple
transmitters.
1.
From the SuperStream menu, use the
Change Zone Map
Figure 4-2: SuperStream Menu—Change Zone Map
The Select Zone Options screen appears.
2.
Position the cursor to add or delete a zone and press
3.
The Change Zone Map screen appears (see Figure 4-3).
4.
Enter the Zone ID number and press
May 1998
<tab>
and press:
(see Figure 4-2).
<Return>
<Return>.
6880494G55-O
to position the cursor to the left of the listing
<Return>.
Valid values are 1-31.
SuperStream Commands
4-3