Siemens SITOP UPS1600 Equipment Manual page 116

Engineering and remote access
3.6 Cyclic and acyclic data
Data
CommandID
Parameter 1
Parameter 2
Data
CommandID
Parameter 1
Parameter 2
Data
CommandID
Parameter 1
Parameter 2
0x0010: Result of DC-UPS command (reading)
Data
CommandID
Parameter 1
0x0011: Battery 1 information parameters (reading)
Data
Number of batteries
Battery 1 available
Minimal temperature
Maximal temperature
Standby time
Buffer time
Total charging current
Total culled current
116
Description
Output ON/OFF: 8200
0
0: output OFF
1: output ON
Description
Reset to Factory Values: 8209
Not used
Not used
>= V2.1.0
Description
Shutdown: 8194
Not used
Not used
Description
CommandID (of the previously sent command)
0: OK
> 0: Error
Description
Number of connected batteries
0 ... not available 1 ... available
Minimal temperature
Maximal temperature
Standby time
Buffer time
Total charging current
Total culled current
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Data type
Unsigned16
Unsigned8
Unsigned8
Data type
Unsigned16
Unsigned8
Unsigned8
Data type
Unsigned16
Unsigned8
Unsigned8
Data type
Unsigned16
Unsigned16
Data type
Unsigned8 from
V2.2
Unsigned8 from
V2.2
Signed8 from
V2.2
Signed8 from
V2.2
Unsigned32
from V2.2
Unsigned32
from V2.2
Unsigned32
from V2.2
Unsigned32
from V2.2