Actualupdatestate; Alarm - Siemens SITOP UPS1600 Equipment Manual

Engineering and remote access
3.10 OPC UA server
Display name Data type
DeviceInputCurrent Float
DeviceInputVoltage Float
DeviceInputVoltageOK Boolean
DeviceLoadCurrent Float
DeviceMaxCurrent Float
DeviceOutputCurrent Float
DeviceOutputVoltage Float
DeviceP1LinkLed Object
DeviceP2LinkLed Object
DeviceRunLed Object
DeviceSFLed Object
DeviceSWSettings Boolean
Valid
DeviceStateLed Object
DeviceTemperature Sbyte
DeviceTotalOperating UInt32
Time
3.10.6.6

ActualUpdateState

Display name Data type
UpdateProgress Integer
UpdateState Enumeration
3.10.6.7

Alarm

Display name Data type
AlarmBattery Boolean
ConnectionBroken
AlarmBattery Boolean
ConnectionHigh
Resistive
AlarmBatteryDeep Boolean
Discharge
AlarmBatteryDeep Boolean
DischargeNoCharging
Possible
AlarmBatteryDefect Boolean
168
Definition Description
AnalogItemType Measured input current of SITOP UPS1600
AnalogItemType Input voltage
PropertyType Input voltage has exceeded the configured threshold volt-
age. Connected devices are powered with the input supply.
AnalogItemType Measured output current of SITOP UPS1600
AnalogItemType Maximum output current supported by the SITOP UPS1600
AnalogItemType Measured output current of SITOP UPS1600
AnalogItemType Measured output voltage
Sitop_1600_ Status of LED "P1"
LedType
Sitop_1600_ Status of LED "P2"
LedType
Sitop_1600_ Status of LED "RUN"
LedType
Sitop_1600_ Status of LED "SF"
LedType
PropertyType This object provides information about whether the SW
parameters or the parameters at the rotary switches are
used. The corresponding setting should be made at the rota-
ry coding switch for the buffer threshold.
Sitop_1600_ Status of LED "OK" Device status
LedType
AnalogItemType Device temperature
AnalogItemType Battery-specific data: Total time for which battery was in
buffer mode during its service life
Definition Description
PropertyType Update progress
MultiState Update status
DiscreteType
Definition Description
PropertyType Connection to battery interrupted - check connection and
fuse
PropertyType High-resistance connection to battery - check battery power
cable
PropertyType Battery is deep discharged - no buffering possible.
PropertyType Battery is deep discharged - replace battery.
PropertyType Battery defective - check fuse and battery voltages.
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76