Siemens SITOP UPS1600 Equipment Manual page 75

Hide thumbs Also See for SITOP UPS1600:
Table of Contents

Advertisement

Parameters when using third-party batteries
Parameter
Battery module
Battery type
Typical ambient temperature
Total capacity
End-of-charge voltage at 20 °C
Temperature coefficient
Battery constant voltage duration
Charge current
Start preserve charge voltage
Stop buffering voltage
Faulty battery voltage
Reset to initial values
• Battery module
Type of SITOP BAT1600, SITOP UPS1100 battery modules or third-party battery
• Battery type
Make/type of battery: Pb ... lead-gel battery, pPb ... pure lead battery
• Typical ambient temperature
Typical ambient temperature of the battery in operation
• Total capacity
Total capacity of the installed batteries.
• End-of-charge voltage at 20 °C
The end-of-charge voltage defines the maximum battery voltage during the charging
phase. When reaching this end-of-charge voltage, the charging status changes from
"constant current" into the "constant voltage" phase. The adjustable end-of-charge voltage
is applicable for a battery ambient temperature of 20 °C. SITOP UPS1600 adapts the end-
of-charge voltage corresponding to the connected SITOP BAT1600 or SITOP UPS1100
depending on the battery ambient temperature and the battery technology. For third-
party batteries, the adaptation is based on configuration parameters battery type, typical
ambient temperature and temperature coefficient.
• Temperature coefficient
Relative dependency of the end-of-charge voltage on the ambient temperature
• Duration of the constant floating voltage charging phase
Duration of the constant voltage charging phase
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Value range
Drop-down menu with the SITOP BAT1600, SITOP UPS1100
battery modules or third-party battery saved by the HSP.
Pb / pPb
-70 ... 100 °C
0 - 3,200 Ah
24.0 - 30.0 V
0 - 200 mV/K
0 - 720 h
0.001 - 3 or 4 or 5 A
23.0 - 30.0 V
18.0 - 23.0 V
1.0 - 18.0 V
-
Engineering and remote access
3.4 SIMATIC STEP 7 in the TIA Portal
Default setting
-
Pb
40 °C
10.0 Ah
27.3 V
36 mV/K
12 h
0.3 A
25.2 V
18.5 V
6.0 V
-
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents