Mounting Position, Mounting Clearances; Sitop Ups1600; Standard Mounting Position - Siemens SITOP UPS1600 Equipment Manual

Mounting position, mounting clearances

6.1

SITOP UPS1600

6.1.1

Standard mounting position

The device is mounted on DIN rails. The device must be mounted vertically in such a way that
the input terminals and the output terminals are at the bottom to ensure correct cooling.
A clearance of at least 50 mm should be maintained above and below the device.
No clearance is required at the side.
Output current as a function of the ambient temperature
Figure 6-1
Figure 6-2
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
6EP4134-3AB00-... Output current in the standard mounting position
6EP4136-3AB00-... Output current in the standard mounting position
6
197