ABB ACS560 Quick Installation And Start-Up Manual page 167

Code Fault / Aux.
(hex) code aux code
visible only on
assistant con-
trol panel and
drive com-
poser))
1 - AI1LessMIN
2 - AI1GreaterMAX
80B0 Signal supervi-
sion 1
80B1 Signal supervi-
sion 2
80B2 Signal supervi-
sion 3
80B3 Signal supervi-
sion 4
80B4 Signal supervi-
sion 5
80B5 Signal supervi-
sion 6
9081 External fault 1
9082 External fault 2
9083 External fault 3
9084 External fault 4
9085 External fault 5
A2A1 Current calibra-
tion
Cause
Fault generated by the
signal supervision func-
tion 1.
Fault generated by the
signal supervision func-
tion 2.
Fault generated by the
signal supervision func-
tion 3.
Fault generated by the
signal supervision func-
tion 4.
Fault generated by the
signal supervision func-
tion 5.
Fault generated by the
signal supervision func-
tion 6.
Fault in external device 1.
Fault in external device 2.
Fault in external device 3.
Fault in external device 4.
Fault in external device 5.
Current offset and gain
measurement calibration
will occur at next start.
What to do
3 - AI2LessMIN
4 - AI2GreaterMAX
Check the source of the fault
(parameter 32.07 Supervision 1 sig-
nal).
Check the source of the fault
(parameter 32.17 Supervision 2 sig-
nal).
Check the source of the fault
(parameter 32.27 Supervision 3 sig-
nal).
Check the source of the fault
(parameter 32.37 Supervision 4 sig-
nal).
Check the source of the fault
(parameter 32.47 Supervision 5
signal).
Check the source of the fault
(parameter 32.57 Supervision 6
signal).
Check external device and paramet-
er 31.01 External event 1 source.
Check external device and paramet-
er 31.03 External event 2 source.
Check external device and paramet-
er 31.05 External event 3 source.
Check external device and paramet-
er 31.07 External event 4 source.
Check external device and paramet-
er 31.09 External event 5 source.
Informative warning. (See paramet-
er 99.13 ID run requested)
Diagnostics 167
EN
HI