ABB ACS560 Quick Installation And Start-Up Manual page 195

132 Electrical installation
c.
Installing option modules
Note: In US deliveries, options are already installed at the factory.
3. Align the BIO-01 module with the option module slot in the front of the drive.
4. Push the BIO-01 option module into position.
Note: If you will install the FPBA
adapter module connectors

5.
See section
[ To be translated (TP-62)]
slots for each module. Install the option modules as follows:
module on top of the BIO-01 module.
Note: Slot 2 in frames R1...R5 is at U
3
Mechanical installation of option modules
Overview of power and control connections
WARNING! Obey the instructions in chapter
you ignore them, injury or death, or damage to the equipment can o
HI -त् व रित इं स ् ट ाले श न और स् ट ार् ट -अप गाइड 195
b
a
01 module, see section
-
on page 77 for suitable connector types.
4
6
If required, you can install fieldbus
potential. You must disconnect po
DC
EN
HI
FPBA-01 PROFIB
page 34 for the av
Safety instructions on p