Applicable Standards - ABB ACS560 Quick Installation And Start-Up Manual

134 Technical data
Energy efficiency data (ecodesign)
Energy efficiency data according to IEC-61800-9-2 is available from the ecodesign
tool (https://ecodesign.drivesmotors.abb.com).

Applicable standards

EN
The drive complies with the following standards. The compliance with the European
Low Voltage Directive is verified according to standard EN 61800-5-1.
HI
EN 60204-1:2006 +
AC:2010
IEC/EN 60529:1992 + A2:
2013
EN 61000-3-12:2011
IEC/EN 61800-3:2004 +
A1:2012
IEC/EN 61800-5-1:2007
IEC 61800-9-2:2017
IEC 60664-1:2007
CE marking
A CE mark is attached to the drive to verify that the drive follows the provisions
of the European Low Voltage, EMC RoHirectives.The CE marking also verifies that
the drive, in regard to its safety functions (such as Safe torque off), conforms with
the Machinery Directive as a safety component.
Safety of machinery. Electrical equipment of machines. Part 1:
General requirements. Provisions for compliance: The final as-
sembler of the machine is responsible for installing
- emergency-stop device
- supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits
for harmonic currents produced by equipment connected to
public low-voltage systems with input current
Adjustable speed electrical power drive systems. Part 3: EMC
requirements and specific test methods
Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
Adjustable speed electrical power drive systems – Part 9-2:
Ecodesign for power drive systems, motor starters, power
electronics and their driven applications – Energy efficiency in-
dicators for power drive systems and motor starters
Insulation coordination for equipment within low-voltage sys-
tems. Part 1: Principles, requirements and tests.