ABB ACS560 Quick Installation And Start-Up Manual page 44

44 EN - Quick installation and start-up guide
Diagnostics
Displays the active faults and warnings and how to fix and reset. For information
about fault and warning codes, see section
1 Active Fault - Displays active faults.
EN
2 Fault History - Lists the fault history.
HI
3 Active Warnings - Displays active warnings.
4 I/O status - I/O settings.
Energy Efficiency
Optimizes the motor flux so that total energy consumption and motor noise level
are reduced when drive operates below the nominal load.
1 Saved energy in kWh - Energy saved in kWh compared to direct-on-line motor
connection.
2 Saved money - Monetary savings compared to direct-on-line motor connection.
3 Saved energy in MWh - Energy saved in MWh compared to direct-on-line motor
connection.
4 Saved money x 1000 - Monetary savings in thousands compared to direct-on-line
motor connection.
5 Cost per kWh - Energy cost (in INR) per kWh.
Diagnostics (page
1
3
1
3
5
139).
2
4
2
4