ABB ACS560 Quick Installation And Start-Up Manual page 296

296 डायग् न ोस् ट िक
(hex) / (
0001
0002
0003
0005
EN
AFAA
HI
AFE1 (off2)
AFE2 (off1 off3)
AFE9
AFF5
AFEB
AFEC
AFED
AFF6
B5F6
B5A0 STO
D501 PFC
D502
D503 VSD PFC
FA90 STo
)
The drive was started but
was not ready to follow the
autotune command.
Required torque reference
could not be reached before
the drive reached maximum
speed.
Motor could not
accelerate/decelerate to
maximum/minimum speed.
Motor could not decelerate
with full autotune torque.
( off2)
( off1 off3)
95.04 24V
120
ID
STO
PFC
PFC
(
Make sure the prerequisites of the
autotune run are fulfilled.
See section Before activating the
autotune routine (page 46) in
firmware manual.
Decrease torque step (parameter
25.38) or increase speed step (25.39).
Increase torque step (parameter
25.38) or decrease speed step (25.39).
Decrease torque step (parameter
25.38) or speed step (25.39).
20.12 1
24 V DC
( )
PFC 76.81 ... 76.84
PFC 76.81 ... 76.84
)
, 95.04
20.22
, : PFC ,
,
76.81 ... 76.84