Mitsubishi Electric MR-E A Series Instruction Manual page 287

15. MR-E-
Class No. Symbol
41 *DIA
www.DataSheet4U.com
42
AG SERVO AMPLIFIER COMPATIBLE WITH ANALOG INPUT
Input signal automatic ON selection
Used to set automatic servo-on (SON) forward rotation stroke end
(LSP) reverse rotation stroke end (LSN).
0
Servo-on (SON) input selection
Forward rotation stroke end (LSP)
input selection
0: Switched on/off by external input.
1: Switched on automatically in servo
amplifier.
(No need of external wiring)
Reverse rotation stroke end (LSN)
input selection
0: Switched on/off by external input.
1: Switched on automatically in servo
amplifier.
(No need of external wiring)
*DI1 Input signal selection 1
Used to assign the control mode changing signal input pins and to set
the clear (CR).
0 0 0
Control change (LOP) input pin
assignment
Used to set the control mode
change signal input connector
pins. Note that this parameter is
made valid when parameter No.
0 is set to select the position/int-
ernal speed change mode.
Set value
0
1
2
3
4
If forward rotation stroke end (LSP) or reverse rotation stroke
end (LSN) is assigned to any pin with parameter No. 48, this
parameter cannot be used.
Name and function
0: Switched on/off by external input.
1: Switched on automatically in servo
amplifier.
(No need of external wiring)
Connector pin No.
CN1-4
CN1-3
CN1-5
CN1-6
CN1-7
15 - 42
Initial Setting Control
Unit
value range mode
0000 S T
Refer to
Name
and
function
column.
S
0002
Refer to
Name
and
function
column.
S/T