Residual Risks - Electrolux KITWSRT Use And Installation Manual

USE AND INSTALLATION MANUAL

1.2.3. RESIDUAL RISKS

Using the machine involves some risks which cannot be completely eliminated through design or with the
installation of adequate protective devices. However, the manufacturer has undertaken to inform the operators of
these risks in this manual by specifically indicating the personal protective equipment to use. When repairing the
machine, adequate space has been provided to limit these risks.
To maintain these conditions, the areas around the machine must always be:
- obstacle-free (e.g. ladders, tools, containers, boxes, etc.);
- clean and dry;
- well-lit.
For the sake of providing the customer with comprehensive information, the residual risks remaining on the
machine are indicated below: these actions are deemed inappropriate and are, therefore, strictly forbidden.
Residual risk
Slipping or falling.
Burns/grazes (e.g. from hot components).
Electrocution.
Overturning of heavy loads.
Mechanical features of safety devices, risks
•
The machine does not have any sharp or protruding parts. The protective devices for the mobile and live
parts are screwed onto the structure and cover to prevent accidental access.
Protective devices installed on the machine
•
The protective devices on the machine are:
fixed protective guards (e.g. casings, covers, side panels, etc.), fixed to the machine and/or frame with
screws or quick-release connectors which can only be removed or opened with specific tools.
Description of hazardous situation
The operator may fall due to water or dirt on the floor.
The operator deliberately or involuntarily touches parts
inside the machine without wearing protective gloves.
Touching live parts while servicing the machine when the
electrical control panel is powered.
When handling the machine or the packaging that
contains it, inadequate lifting systems or accessories are
used or the load is unstable or unbalanced.
10