Table of Contents
Advertisement
USE AND INSTALLATION MANUAL
SPECIFICATIONS / DESIGN CLASS
Valve body.........................................................................Noryl glass fibre® - List NSF material
Rubber components ................................. Cold water components - List NSF material
Certification of valve material ...WQA Gold Seal Certified to ORD 0902, NSF/ANSI 44, CE
Weight (valve with controller) .......................................................................................... 1.8 kg (4 lb)
Hydrostatic pressure test.................................................................................... 20.69 bar (300 psi)
Water temperature......................................................................................... 2 - 38°C (35 - 100°F)
Ambient temperature ....................................................................................... 2 - 48.9°C (35 - 120°F)
VALVE FITTINGS
Inlet/Outlet:
Drain line
Brine line
Air control built into valve
ELECTRICAL CHARACTERISTICS
Controller working voltage
Input frequency supply
Motor input voltage
Controller energy consumption
1.4.4. BY-PASS VALVE
The softener is fitted with a by-pass valve which cuts off the conditioner from the water system and prevents
unconditioned water from being used. Routine maintenance and maintenance procedures may also require the
system to be excluded.
male (brass) G3/4".
d.16 mm.
3/8" NPT standard.
12 VAC (requires use of transformer supplied)
50
12 VAC
3 W Average power
DRAIN
DRAIN
15
Advertisement
Table of Contents
