Table of Contents
Advertisement
USE AND INSTALLATION MANUAL
3.4.3. UNSCHEDULED MAINTENANCE WORK
PART TO BE CHECKED
Basic calibration
Functional test
3.4.4. RECOMMENDATIONS
Use original spare parts
To ensure the device works correctly safely, only use the original spare parts and accessories
recommended by the manufacturer.
Using non-original spare parts will void any warranty.
Make sure you have an adequate number of spare parts in stock
Use of approved original lubricants
•
Dow Corning #7 release compound.
Maintenance instructions
•
Disinfect and clean the system at least once a year or when the treated water starts to have an unusual taste
or smell;
•
Perform hardness tests on the incoming and treated water.
3.4.5. CLEANING AND MAINTENANCE
Ref.
Procedure
Warning
Before carrying out any cleaning or maintenance work, follow the procedure described below
A
Release the system pressure before carrying out any work by starting an extra regeneration
B
Disconnect the electrical control panel from the power supply
C
Shut off the water supply or switch the by-pass valve to the by-pass position
CHECK
Functional test
Functional test
FREQUENCY
3 MONTHS
30
Advertisement
Table of Contents
