Table of Contents
Advertisement
USE AND INSTALLATION MANUAL
4.1.2. TIMER DISPLAY
1 Days of the week. The flag under the day indicates the day of the current week.
5 "PM" indicates whether the time shown is between midday and midnight (there is no AM indicator). The PM
indicator is not used if the clock is set to 24 hours.
6 When "MIN" is displayed, the value shown is in increments of minutes.
8 When "Kg" is displayed, the value is indicated in kilograms.
9 Four digits are used to display the time or program value. Used also for error codes.
10 The colon flashes when indicating the time. This indicates normal operation.
12 When "x2" is displayed, a second regeneration is required.
13 The recycling symbol is shown (flashing) when regeneration is requested at the time of the next regeneration.
It is also displayed (fixed) during regeneration.
14 The display cursor is next to "SALT" when the quantity of regenerant is programmed.
15 The display cursor is next to "REGENERATION TIME" (date and time of regeneration) when the time and day
for regeneration is programmed.
16 The display cursor is next to "TIME" and "DAY" when the current time and date are programmed.
17 The hourglass is displayed when the motor is running. The camshaft must be turning.
18 These cursors appear next to the object currently being displayed.
21 Shows when the water is flowing through the valve.
26 Cycle. The number that corresponds to the current cycle in the regeneration sequence is shown at number 23.
27 Hardness setting.
28 Capacity display—shows the estimated system capacity.
32
Advertisement
Table of Contents
