Siemens SIMATIC S7-1500 System Manual page 344

Test and service functions
16.1 Test functions
Testing with CPU Trace
The trace function is used to record the CPU tags, depending on the settable trigger
conditions. Examples of tags are the system and user tags of a CPU. Plant states can also be
recorded if the drive parameters have been interconnected with CPU tags using relevant
frames.
The CPU saves the recordings. If necessary, you can display and evaluate the recordings with
STEP 7 or over the Web server. The Trace function can be called from the CPU's folder in the
project tree, under "Traces".
Please also see the following FAQ on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/102781176) relevant for Trace
functions.
Testing with Drive Trace
You use Drive Trace to records the states of a drive and evaluate them using Startdrive. As the
states are recorded in the drive itself (minimum clock 125 µs), Drive Trace is particularly
useful for monitoring highly dynamic processes.
For further information, see the Trace function section in the SINAMICS S120 Startdrive
(https://support.industry.siemens.com/cs/ww/de/view/109781583/en) commissioning manual
Simulation
With STEP 7 and S7-PLCSIM or S7-PLCSIM Advanced you can run and test the hardware and
software of the project in a simulated environment.
Start the simulation with S7-PLCSIM using the menu command "Online" > "Simulation" >
"Start".
You can find more information on simulation with S7-PLCSIM Advanced in the
S7 PLCSIM Advanced (https://support.industry.siemens.com/cs/de/en/view/109813110)
function manual.
Additional information
Additional information on the test functions can be found in the STEP 7 online help.
Additional information about testing with trace functions is available in the Function Manual
Using the trace and logic analyzer function
(https://support.industry.siemens.com/cs/ww/en/view/64897128).
342
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD