Fujitsu PRIMERGY RX200 S2 User Manual page 155

• When the Teaming function is being used, you cannot use Windows Load Balancing Service
(WLBS) and Network Load Balancing (NLB).
• PG-1852 does not become a member of a Team.
• If FEC/GEC type is selected, you can only use the switch for link aggregation.
• When adding/deleting a FEC/GEC type member, perform such operation under a linked down state.
Only a link down error between a LAN card (onboard LAN) and the switch it connects with, and the
equivalent errors lead to switching of the route. Therefore, if only the switch or LAN card (onboard
LAN) is partially damaged and the route being used is sound at the link level, the route will not be
switched in the team, but the communication within the Team may become an error.
■ Teaming Configuration Procedure
1
Start up Intel
used.
For Windows Server 2003
1. Click [Start]
For Windows 2000 Server
1. Click [Start]
The [Control Panel] window appears.
2. Start up "Intel(R) PROSet".
2
Select a card to incorporate in a Team and right-click it.
3
Click [Create New Team] in [Add to Team].
[Teaming Up Wizard] appears.
4
Select a Teaming type with which you want to create a Team.
Select the following depending on the Teaming type selected accordingly.
• AFT type: "Adapter fault tolerance"
• ALB type: "Adaptive load balancing"
• SFT type: "Switch fault tolerance"
• FEC type: "FEC/802.3ad Static link aggregation"
• GEC type: "GEC/802.3ad Static link aggregation"
5
Select a LAN card to incorporate in the Team and click [Next].
6
Click [Finish].
®
PROSet. The procedure differs depending on the OS being
→ →
[Control Panel]
→ →
[Settings] [Control Panel].
PRIMERGY RX200 S2 User's Guide
[Intel(R) PROSet].
5
155