Fujitsu PRIMERGY RX200 S2 User Manual page 210

Chapter 8 Hardware Configuration/Utilities
2
Use the [↑] [↓] keys to select the exit mode.
• To save configuration changes before exiting.
Move the cursor to [Save Changes & Exit] and press the [Enter] key. The message "Save
configuration changes and exit now?" is displayed.
• To exit without saving configuration changes.
Move the cursor to [Discard Changes & Exit] and press the [Enter] key. The message
"Configuration has not been saved! Save before exiting?" is displayed.
3
Use the [←] and [→] keys to move the cursor to [Yes] or [No], and press the
[Enter] key.
• If you selected [Save Changes & Exit] from the [Exit] menu.
Select [Yes] to exit. After saving changes to settings, the BIOS Setup Utility closes and the
server restarts.
Select [No] to return to the BIOS Setup Utility.
• If you selected [Discard Changes & Exit] from the [Exit] menu.
Select [Yes] to save changes before exit. After saving changes to settings, the BIOS Setup
Utility closes and the server restarts.
Select [No] to exit without saving changes. The BIOS Setup Utility closes and the OS starts.
210