Fujitsu PRIMERGY RX200 S2 User Manual page 299

2
Enter the following command.
Remote [Enter]
The following message appears.
Password>
3
Enter the following command.
Remote [Enter]
The following menu appears.
*******************************************
Welcome to System RX200 S2
BMC FW: *.**
State: Off (na = Currently not available)
*******************************************
REMOTE MAINTENANCE MENU
(1) Immediate Power Down
(2) Immediate Reset
(3) Graceful Power Down
(4) Power Cycle
(5) Power On
(6) View System Eventlog (SEL)
Enter selection or (0) to quit:
The "State" line in the message will show either of the following.
Message
On
Off
4
Use numeric keys to enter the desired menu number.
The table below shows the menu items and corresponding operations. Unavailable menu items
are indicated with "na" in parentheses to the left of that item.
Menu
(1) Immediate
Power Down
(2) Immediate Reset
(3) Graceful Power
Down
(4) Power Cycle
SDRR: *.**
table: Messages in the Main Menu Window
The server is turned on.
The server is turned off.
table: Menu Items and Operations
Operation
The server will be turned off.
The server will be restarted.
The server will be turned off.
When Windows is running,
the server is turned off after
the OS is shut down.
The server will be restarted.
When Windows is running,
the server is restarted after the
OS is shut down.
PRIMERGY RX200 S2 User's Guide
Status
Operation after selecting the item
When "Do you really want to do this? [y/n]"
appears, enter the following command.
y [Enter]
When "Do you really want to do this? [y/n]"
appears, enter the following command.
y [Enter]
When Windows is running, "System shutdown
due to <software command> in 60 second! Press
Cancel to abort!" appears in the popup window.
Select [OK].
A
299