Security Menu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.10 Security Menu

Configures the security features.
Main
Setup Password
System Password
Set Setup Password:
Set System Password:
Setup Password Lock:
System Password Mode:
SETUP prompt:
Virus Warning:
System Load:
Diskette Write:
Flash Write:
F1 Info
Esc Exit
Item
Setup Password/
System Password
Set Setup Password
Set System Password
Setup Password Lock
System Password Mode
SETUP prompt
222
PhoenixBIOS Setup Utility
Advanced Security Server
Not installed
Not installed
[Enter]
[Enter]
[Standard]
[System]
[Enabled]
[Disabled]
[Standard]
[Enabled]
[Enabled]
-/+ Change Values
Select Item
Select Menu
Enter Select
table: Items on the Security Menu
Setting
-
[Enter]
[Enter]
• Standard (at the time of
purchase)
• Extended
System
• Disabled
• Enabled (at the time of
purchase)
Exit
Item Specific Help
Setup Defaults
F9
F10 Save and Exit
Sub-Menu
Description
Displays whether or not each password is set.
[Not installed] appears when the password is not
set, and [Installed] appears when it is set.
Sets a setup password. The setup password prevents
unauthorized startup of the BIOS Setup Utility.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" ( pg.272).
Sets a system password. The system password
prevents unauthorized access to the system.
A setup password must be specified.
For procedures for setting, changing, and deleting
the password, refer to "9.4.2 Security against
Unauthorized Use" ( pg.272).
Sets the scope protected by the setup password.
A setup password must be specified.
• Standard
You will be requested to enter the setup password
while the BIOS Setup Utility is starting up.
• Extended
You will be requested to enter the setup password
when the BIOS Setup Utility starts up. The BIOS
for the expansion cards is locked during POST.
Sets the scope protected by the system password. A
setup password and a system password must be
specified.
Sets whether or not to display a setup message
"<F2> BIOS Setup" in the [POST] window when
the system restarts.