Adapter Properties Menu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.3.5 Adapter Properties Menu

Sets detailed configuration information on each SCSI adapter.
From the list area on the [Main] menu, select the SCSI adapter to configure.
LSI Logic MPT SCSI Setup Utility
Adapter Properties
Adapter PCI
Bus
1020/1030
Esc=Abort/Exit
Item
Device Properties
RAID Properties
Synchronize Whole Mirror
Rebuild
Host SCSI ID
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay (Secs)
Secondary Cluster Server
Termination Control
Restore Defaults
240
Version
Dev/
Func
3 28
<Device Properties>
<RAID Properties> <Synchronize Whole Mirror> <Rebuild>
Host SCSI ID
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay (Secs)
Secondary Cluster Server
Termination Control
<Restore Defaults>
ArrowKeys=Select Item
Home/End=Select Item
table: Items on the Adapter Properties Menu
Setting
Configures devices connected to SCSI adapters. Press the [Enter] key to display
the submenu.
"8.3.6 Device Properties Submenu" (pg.241)
Configures or deletes an array.
The server does not support these items. Do not select these item.
7 (Fixed parameter)
Low to High (0..Max)
(Fixed parameter)
None (Fixed parameter)
SCSI Plug and Play
Mapping (Fixed parameter)
2 (Fixed parameter)
No (Fixed parameter)
Auto (Fixed parameter)
The server does not support this.
MPTBIOS-IMx.xx.xx
[7]
[Low to High (0..Max)]
[None]
[SCSI Plug and Play Mapping]
[2]
[No]
[Auto]
-/+=Change[Item]
Enter=Execute<Item>
Description
Sets the range of host adapter SCSI IDs.
Sets the order of SCSI devices to be scanned during
POST.
Sets whether or not to support a removable disk unit
(MO disk unit) as a SCSI disk drive in the SCSI
Setup Utility.
Specifies the CHS information mapping method.
Sets device startup intervals.
Sets whether or not to use this server in a cluster
configuration.
Sets the SCSI bus terminal.