Server Menu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.11 Server Menu

Configures the server settings.
Main
O/S Boot Timeout:
Mode
Timeout value
ASR&R Boot Delay(min):
Power Cycle Delay:
Boot Retry Counter:
Diagnostic System:
Critical Temperature Monitoring:[Disabled]
Memory scrub:
BIOS runtime logging:
Clear Screen Delay(sec):
IPMI
CPU Status
Memory Status
LAN Setting
Console Redirection
F1 Info
Exit
Esc
Item
O/S Boot Timeout
224
PhoenixBIOS Setup Utility
Advanced Security Server
[Disabled]
[Continue]
[0]
[2]
[5]
[3]
[Disabled]
[Enabled]
[Enabled]
[5]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Server Menu
Setting
• Disabled (at the time of
purchase)
• Enabled
Exit
Item Specific Help
Setup Defaults
F9
Sub-Menu F10 Save and Exit
Description
Sets whether to enable or disable the OS Boot
Monitoring function, when ServerView is installed to
the OS.
If for some reason booting the operating system is
interrupted when this function is enabled, the system
will automatically restart.
The OS Boot Monitoring function can also be
enabled or disabled from ServerView.
Note:
If ServerView is not installed to the OS, be
sure to set to [Disabled].
If the setting is enabled, the server may
automatically turn off or restart unexpectedly.
Even when ServerView is installed on the OS,
if starting the system while the Server
Management Tools disk is inserted, be sure to
disable the OS Boot Monitoring function.
If the system is started with this function
enabled, the server may automatically turn off
or restart improperly.
If the OS Boot Monitoring function is needed,
it should be reset to enabled before resuming
normal server operation.
When setting this function, refer to
"ServerView User's Guide" to fully learn about
its specifications, in order to use it properly
with the correct settings.