Concluding Steps - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 49: Connecting the FBU
Ê Connect the FBU to the SAS RAID HDD module (see circle).
7.2.5.4

Concluding steps

Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page 57.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
154
86.
93.
Upgrade and Maintenance Manual
"Closing the server blade" on
58.
"Enabling boot
"Enabling
BX920 S4