Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual page 253

Ê Install the heat sinks in the new server blade, see section
processor heat sinks" on page
Ê Remove the mezzanine cards carrier with the installed mezzanine card(s)
from the defective server blade, see section
on page 136.
Ê Remove the memory modules from the defective server blade and install it
into the new server blade and install it into the new server blade, see section
"Replacing memory modules" on page
Ê If the SAS backplane is installed, remove the SAS backplane from the
defective server blade and remove the SATA backplane from the new server
blade as described in section of
page 114.
Ê Install the SAS backplane to the new server blade as described in section of
"Installing the HDD/SSD backplane" on page
Ê If an UFM is installed, remove it from the defective server blade and install
it into the new server blade, see section
Ê If an TPM is installed, remove it from the defective server blade and install it
into the new server blade, see section
Ê If an onboard SAS enabling key is installed, remove it from the defective
server blade and install it into the new server blade, see section
SAS enabling key" on page
Ê Install the mezzanine cards carrier into the new server blade, see section
"Installing mezzanine cards" on page
Ê If an FBU is installed, remove it from the defective server blade, see section
"Removing the FBU (Flash Backup Unit)" on page
Ê If an SAS RAID HDD module is installed, remove it from the defective server
blade and install it into the new server blade, see section
SAS RAID HDD module" on page
Ê If applicable, install the FBU in the new server blade, see section
the FBU (Flash Backup Unit)" on page
Ê Use the cover from the defective server blade and close the server blade,
see section "Closing the server blade" on page
Use the cover from the defective server blade because the COA label is
stuck there.
BX920 S4
201.
"Removing the HDD/SSD backplane" on
238.
150.
Upgrade and Maintenance Manual
"Removing mezzanine cards"
178.
115.
"Replacing the UFM" on page
"Replacing the TPM" on page
130.
155.
152.
57.
Server blade
"Handling
222.
235.
"Onboard
"Replacing the
"Installing
253