Replacing Processor Heat Sinks; Removing The Processor Heat Sink; Applying Thermal Paste; Installing The Processor Heat Sink - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

9.5.5

Replacing processor heat sinks

9.5.5.1

Removing the processor heat sink

Ê Remove the processor heat sink as described in section
processor heat sinks" on page
9.5.5.2

Applying thermal paste

Ê Apply thermal paste to the processor surface as described in section
"Applying thermal paste" on page
9.5.5.3

Installing the processor heat sink

Ê Install the processor heat sink as described in sections
sink and processor" on page 203
9.5.6

Concluding steps

Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page 57.
Ê If memory modules have been removed, install the memory into their original
location as described in section
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
BX920 S4
206.
208.
and
"Installing a memory module" on page
Upgrade and Maintenance Manual
"Installing the heat sink" on page
"Closing the server blade" on
Processors
"Removing
"Preparing the heat
204.
173.
58.
207