Installing A Memory Module - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

Ê If applicable, remove the dummy DIMM module.
8.2.3

Installing a memory module

Ê Identify the correct memory slot according to the mounting order described
in section "Memory sequence" on page
Ê If required, remove the mezzanine carrier for better handling of the DIMMs
of CPU 1.
Figure 58: Opening the securing clips
Ê Press the securing clips on both sides of the relevant memory slot outward.
Figure 59: Inserting the memory module
Ê Place the DIMM module over the respective slot (1).
Ê Make sure the two securing clips (2) are opened out.
Ê Align the notch on the bottom of the module with the crossbar in the
connector (3).
Ê Press down on the memory module (1) until the securing clips snap into the
cutouts at each end of the module (2).
BX920 S4
Upgrade and Maintenance Manual
164.
Main memory
173