10.2.3.5 Concluding steps
Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page
57.
Ê Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
10.2.3.6 Software configuration
The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Connect a remote DVD drive to the server blade as described in section
"Connecting virtual media to the managed server blade" on page
Ê Insert the "Recovery Tool CD" into the remote DVD drive and close the drive
tray.
Ê Switch on the server blade.
Ê The server blade should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
BX920 S4
62.
Upgrade and Maintenance Manual
System board components
"Closing the server blade" on
86.
93.
58.
"Closing the rack
"Enabling boot
"Enabling
65.
225