Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual page 254

Server blade
I
It is necessary to complete ID card with the model name and the serial
number. Please use the new label.
– If applicable, reinstall the HDD/SSD modules in their original mounting bays,
see section "Installing the 2.5-inch HDD/SSD module" on page
– Insert the server blade in the system unit see section
blade in the system unit" on page
– If available, update the system board BIOS and the iRMC to the latest
version as described in section
BIOS and iRMC" on page
– If available, restore the BIOS settings as described in section
BIOS settings" on page
– If available, restore the iRMC settings as described in section
iRMC settings" on page
I
In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to program the
chassis ID prom using the "ChassisIDProm Tool" after installing the new
Server Blade.
254
58.
"Updating or recovering the system board
75.
80.
80.
Upgrade and Maintenance Manual
105.
"Installing the server
"Restoring
"Restoring
BX920 S4