Updating Or Recovering The Irmc - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

Basic software procedures
Ê Remove the server blade from the system unit as described in section
"Removing a server blade" on page
Ê Open the server blade as described in section
on page 56.
Ê Turn switch 3 of the user DIP switch bank to OFF, see section
settings" on page
Ê Close the server blade as described in section
page 57.
Ê Reinstall the server blade in the system unit as described in section
"Installing the server blade in the system unit" on page
Ê Switch on the server blade as described in section
blade" on page
Ê You can now put the server blade back into operation.
5.2.1.2

Updating or recovering the iRMC

TFTP update procedure
Ê Log in to the management blade web interface.
Ê Open the Information / Operation – Operation – Firmware Update menu.
Ê Open the Server Blade tab.
Ê In the Server Blade to be Updated box select the desired server.
Ê In the Update settings box select the update firmware (iRMC).
Ê In the Update settings box enter the TFTP IPv4 or IPv6 address of the TFTP
server and the pathname of the TFTP firmware file.
I
For more detailed information, refer to the Help – On Page function of
the management blade web interface.
Ê Click the Apply button to start the update process.
The status column in the Server Blade to be Updated box provides information
on the update progress.
V
CAUTION!
Do not interrupt the iRMC upgrade process after it has started. If the
process is interrupted, the iRMC may be permanently corrupted.
78
259.
60.
Upgrade and Maintenance Manual
54.
"Opening the server blade"
"Closing the server blade" on
"Switching on the server
"Onboard
58.
BX920 S4