NEC Univerge SV8100 Programming Manual page 255

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Item
No.
08
09
10
11
12
13
14
15
16
17
18
19
Programming Manual
Item
Transfer Information Display
Turns off or on an extension ability for incoming
Transfer preanswer display.
Group Hold Initiate
Turns off or on an extension ability to initiate a Group
Hold.
Group Hold Answer
Turns off or on an extension ability to pick up a call on
Group Hold.
Automatic On-Hook Transfer
Turns off or on an extension ability to use Automatic
On Hook Transfer.
Call Forwarding Off Premise (External Call
Forwarding)
Turns off or on an extension ability to set up Call
Forwarding Off-Premise for their telephone.
Operator Transfer After Hold Callback
Turns off or on an extension ability to have a call
which recalls from hold transfer to the operator.
Trunk-to-Trunk Transfer Restriction
Turns off or on the Trunk-to-Trunk Transfer
Restriction. If enabled, Trunk-to-Trunk Transfer is not
possible.
VRS Personal Greeting (Message Greeting)
Turns off or on a Service Code to record, listen to, or
erase the Personal Greeting Message.
Call Redirect
Turns off or on a multiline terminal user ability to
transfer a call to a predefined destination (such as an
operator, voice mail, or another extension) without
answering the call.
Department Group Trunk-to-Trunk Transfer (Each
Telephone Group Transfer)
Turns off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department Group.
No Recall
No Recall set to "Allow" (1) will not stop transferred
calls from recalling from a virtual extension.
Hold/Extended Park
Determine if an extension Class of Service should
allow either a normal or extended Park.
Issue 1.0
Default
Input Data
COS
01~14
0 = Off
1 = On 1
0 = Off
1
1 = On
0 = Off
1 = On 1
0 = Off
1 = On 0
0 = Off
1 = On
0
0 = Off
0
1 = On
0 = Off
1 = On
0
0 = Off
1
1 = On
0 = Off
1 = On
1
0 = Off
1 = On
1
0 = Off
1 = On 0
0 = Off
0
1 = On
COS
15
1
1
1
0
0
0
0
1
1
1
0
0
2 - 221