Call Forward Split Settings - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
UNIVERGE SV8100
Level:
IN
Description
Use Program 24-09 : Call Forward Split Settings to assign Call Forwarding Type
and the destination numbers for each extension/virtual extension. The destination
can be up to 24 digits long, using 0~9, , #, and @. Be sure to include the trunk
access code (e.g., 9) in the number if the destination is off-premise.
Input Data
Item
No.
01
02
03
04
05
Programming Manual
Program 24 : Hold/Transfer Setup
Only ISDN uses the @ symbol.
Pause can be set by LK 1.
Extension Number
Call Forwarding Type:
0 = Call Forwarding Off
1 = Call Forwarding with both ring
2 = Call Forwarding when no answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no answer
5 = Call Forwarding when busy
CO Call Forwarding Destination for Both Ring, All Call, No Answer:
1~9, 0, #, , R, @
(Up to 24 digits)
Only ISDN uses the @ symbol
Intercom Call Forwarding Destination for Both ring, All Call, No
Answer:
1~9, 0, #, , R, @
(Up to 24 digits)
CO Call Forwarding Busy Destination:
1~9, 0, #, , R, @
(Up to 24 digits)
Intercom Call Forwarding Busy Destination:
1~9, 0, #, , R, @
(Up to 24 digits)

24-09 : Call Forward Split Settings

Input Data
Issue 1.0
Maximum 8 digits
Default
0
No
Setting
No
Setting
No
Setting
No
Setting
2 - 331