Call Forward Split Settings - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 24-09 : Call Forward Split Settings to assign Call Forwarding Type
and the destination number for each extension/virtual extension. The destination can
have up to 24 digits, using 0~9,
sure to include the trunk access code (e.g., 9) in the number if the destination is off-
premise.

Input Data
Item
No.
SV8100 Programming Manual
Program 24 : Hold/Transfer Setup
A pause for analog trunks can be assigned by pressing Line Key 1.
Extension Number
01 Call Forwarding Type:
0 = Call Forwarding Off
1 = Call Forwarding with both ring
2 = Call Forwarding when no answer
3 = Call Forwarding all calls
4 = Call Forwarding busy or no answer
5 = Call Forwarding when busy
02 CO Call Forwarding Destination for Both Ring, All Call, No Answer:
0~9, #,  , R, and P
(Up to 24 digits)
03 Intercom Call Forwarding Destination for Both ring, All Call, No
Answer:

0~9, #, , R, and P
(Up to 24 digits)
04 CO Call Forwarding Busy Destination:
0~9, #,  , R, and P
(Up to 24 digits)
05
Intercom Call Forwarding Busy Destination:

0~9, #, , R, and P
(Up to 24 digits)

24-09 : Call Forward Split Settings

, #, and P (P is a pause used for analog trunks). Be

Input Data
Issue 11.0
Maximum eight digits
Default
0
No
Setting
No
Setting
No
Setting
No
Setting
2 - 381