Ip System Id - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-27 : IP System ID to set the IP address of the networked IP
systems.
(This program requires software Version 4000 or higher.)
Input Data
Item
No.
Feature Cross Reference
None
2 - 44
Item
01 IP Address
System ID is related with the System ID
in the Numbering Plan (Program
11-01-03). When the digits are analyzed
and the system ID is determined from
the SV8100 data set in the Numbering
Plan, the networking call is sent to the
IP Address set in this program.
The IP Address should be the IP
Address of the peer CPU (Program
10-12-01).
02 Call Procedure Port
The Port Number should be set with the
same value as the H.225 setup port in
Program 84-02-33.
Conditions
None

10-27 : IP System ID

Input Data
0.0.0.0~126.255.255.254
128.0.0.1~191.255.255.254
192.0.0.1~223.255.255.254
1~65535
Program 10 : System Configuration Setup
UNIVERGE SV8100
Default
0.0.0.0
1730