NEC UNIVERGE SV8100 Programming Manual page 888

Issue 11.0
Alarm
Type Report
No.
63 0 0 SIP-MLT
trouble
information.
64 1 0 VoIPDB LAN
Link Error.
65 0 0 VoIPDB
trouble
information.
66 2 0 SIP extension
License Error.
67 0 0 SIP illegal
packet
received.
68 2 0 VoIP DSP All
Busy Alarm
69 --- Reserved ---
70 2 0 SIP Stack
Reconfig
Report
71 2 0 CID Buffer
Threshold
72~79 --- Reserved ---
80 1 0 NetLink start
error.
81 2 0 NetLink call
trouble
information.
2 - 846
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
1. The trouble occurred in
the SIP-MLT relation.
2. The DSP resource could
not be acquired at
incoming/outgoing.
3. The negotiation with
VoIPDB failed.
The link of LAN of VoIPDB
came off.
When DSP of VoIPDB
notifies Error.
More than the number of
licenses to which the SIP
extension terminal was
turned on at REGISTER.
The system received an
illegal packet.
1. Provides alert when all
DSP resources are being
used.
2. Used to troubleshoot or
alerting when upgrade is
needed.
When the number of CID
records is over the limit,
CID buffer threshold alarm
(71) can be reported.
The error occurred when
NetLink started.
1. The trouble occurred in
the NetLink relation.
2. The DSP resource was
not acquired at
incoming/outgoing.
Cause Action
1. The packet loss Confirm whether each
occurred on the equipment such as
network or the wirings and HUB is
wiring cutting normal.
occurred.
2. DSP of VoIP not
acquired.
1. LAN cable 1. Confirm LAN
defective. connector and
wiring.
2. Connected HUB
broken. 2. Check with maker on
uncertain points.
3. Defective
CD-CP00-US.
PZ-32IPLA 1. Possibility of
defective. defective hardware.
2. Check with maker on
uncertain points.
Wrong number of 1. Confirm number of
licenses. licenses for SIP
extension terminals.
2. Check with maker on
uncertain points.
A client or network Check with maker on
is in an illegal state. uncertain points.
Not enough DSP Install PZ-VMDB with
resources in more DSP resources.
system.
Defective 1. Possibility of
CD-CP00-US. defective hardware.
2. Check with maker.
PZ-32IPLA DSP 1. Confirm wiring and
not acquired. system data settings.
2. Check with maker on
uncertain points.
Program 90 : Maintenance Program
UNIVERGE SV8100
Alarm
Recovery
Status
WAR
When the ERR
REC
connection
returns
normally, the
error is
recovered.
WAR
When the WAR
number of
registration of
SIP extension
terminals falls
below the
number of
licenses.
INF
ERR
WAR