UNIVERGE SV8100
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Drive to the SRAM and Flash ROM in the system.
Feature Cross Reference
None
SV8100 Programming Manual
Program 90 : Maintenance Program
Program 90-04 : Load Data
Input Data
Item
Item
No.
01
Load Data
Conditions
After uploading the programming, reset the system and wait a few minutes for the
system to reset completely before accessing any line or special system feature.
Otherwise, some unusual LED indications may be experienced.
to load the system data from the inserted USB Flash
Input Data
Dial 1+ press Transfer (Press Transfer to cancel)
Issue 11.0
90-04 : Load Data
2 - 833