90-04: Load Data - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use
Drive to the SRAM and Flash ROM in the system.
Input Data
Item
No.
Feature Cross Reference
None
Programming Manual
Program 90 : Maintenance Program
Program 90-04: Load Data
Item
01
Load Data
Conditions
After uploading the programming, reset the system and wait a few minutes for the

system to reset completely before accessing any line or special system feature.
Otherwise, some unusual LED indications may be experienced.
to load the system data from the inserted USB Flash
Dial 1+ press Transfer (Press Transfer to cancel.)

90-04: Load Data

Input Data
Issue 10.1
2 - 861