Sip Registrar/Proxy Information Basic Setup - NEC Univerge SV8100 Programming Manual

Issue 10.1
Program 10 : System Configuration Setup

10-33 : SIP Registrar/Proxy Information Basic Setup

Level:
IN
Description
Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the
registrar/proxy options for SIP extensions.
Input Data
Item
No.
Feature Cross Reference
None
2 - 56
01
Registration Expire Time
After this time expires, the UA's are forced to
reregister with the CPU. This allows the CPU to keep
a current location of the entire end UA's.
02
Authentication Mode
Check here if a password is desired for the IP SIP
phones to register. When checked, 15-05-16 must
have a password entered and also the SIP phone
must have the same password. When using
Authentication, the station number is the
authorization name.
03
Registrar/Proxy Domain Name
Set the domain name of the SIP proxy.
04
Registrar/Proxy Host Name
Set the domain name of the SIP proxy.
05
NAT Mode
Enable this Mode if the System controls the SIP
Phone by the NAT router.
Conditions
None
Item
Program 10 : System Configuration Setup
UNIVERGE SV8100
Input Data
60 ~ 65535
0 = Disable
1 = Enable
Up to 64 Characters
Up to 48 Characters
0 = Disable
1 = Enable
Default
3600
0
None
None
0