NEC Univerge SV8100 Programming Manual page 913

UNIVERGE SV8100
Alarm
Type Report
No.
100 0 NetLink link
1
error.
Feature Cross Reference
None
Programming Manual
Table 2-20 Description of Alarm (Continued)
Name Content of Alarm
This alarm occurs when
the primary system cannot
communicate with
secondary system
Conditions
The entire terminal that has an Alarm Display setting can be set at PRG90-50-01.

System Alarm Type is shown despite the setting done at 90-10-01. If multiple

Alarm Display Setting is set, only one highest priority alarm will be shown on a
LCD Display.
The priority level (highest -> lowest): Alarm 55 > Alarm 7 > Alarm 5 > Alarm 30 >

Alarm 8 > Alarm 52> Alarm 29 > Free Demo License Period.
Cause Action
Primary system Primary system cannot
cannot communicate with
communicate with Secondary system
Secondary system because of Network
because of error
Network error
Issue 10.1
Alarm
Recovery
Status
WAR
2 - 877