NEC Univerge SV8100 Programming Manual page 507

UNIVERGE SV8100
Item
No.
19
20
21
22
23
24
Feature Cross Reference

Programming Manual
Dialed Number Output Format (OT)
Determine if the dialed number should display the
first 20 digits or the last 20 digits. This option is only
available for outgoing calls.
External Information CFW Mode (OT)
Determine which information is displayed in the
"STATION" area for a transferred call when the
extension has Call Forward set with an Abbreviated
Dial number as the destination. Selecting "0"
(Transfer Info) will display the extension number
which called the extension with external Call
Forward set. Selecting "1" (Incoming Info) will display
the extension number which has the external Call
Forward set.
This option only applies when Call Forward is set
using a service code (Program 11-11-01~11-11-07)
and the destination uses an Abbreviated Dial bin. It
does not include Off-Premise or Centrex transfers.
S-Point Terminal Number
Security Auto Dialing
Watch Auto Dialing
Mark Virtual Loop (Not Used)
Define whether calls routed via the ISDN Virtual
Loopback are tagged.
Conditions
None
Station Message Detail Recording
Item Input Data
0 = First 20 Digits
1 = Last 20 Digits
0 = Transfer
Information
1 = Incoming
Information
0 = MSN Number
1 = Extension
Number
0 = No Output
1 = Output
0 = No Output
1 = Output
0 = Don't mark
1 = Mark
Issue 10.1
Default
0
0
0
0
0
0
2 - 471