NEC Univerge SV8100 Programming Manual page 868

Issue 10.1
Input Data
Item
No.
10
11
12
13
14
15
16
2 - 832
Item
DTMF Twist Positive Level
Used only by IPLB.
DTMF Twist Negative Level
Used only by IPLB.
DTMF Duration (Out of Band)
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
DTMF Level
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
ICMP Redirect
Used only by IPLB.
DTMF Detect Minimum Duration
Used only by IPLB.
This setting is the minimal time setting to
distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
DTMF Detect Minimum Level
Used only by IPLB.
This setting is the minimal level setting to
distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
Input Data
0~24(dB)
0~24(dB)
30~2000(ms)
1~61 (-36dB ~ +24dB)
1: -36dB
2: -35dB
:
37: 0dB
:
60: 23dB
61: 24dB
0 = Enable
1 = Disable
0 = voice packets WILL follow
ICMP redirect messages.
1 = voice packets WILL NOT
follow ICMP redirect
messages.
 for signaling packets and
ICMP refer to PRG 10-12-08.
23 ~ 2000(ms)
0: -40dbm
1: -39dbm
2: -38dbm
:
31: -9dbm
Program 84 : Hardware Setup for VoIP
UNIVERGE SV8100
Default
5
0
100
25 (-12db)
1
30
2 (-38dbm)