Ip Trunk Availability - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Program 10 : System Configuration Setup
Level:
IN
Description
Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP
trunks and assign the number of ports if IP Trunk is enabled.
Input Data
Input Data
Item
No.
01
02
04
Programming Manual
Slot Number
Item
0 = Disable
IP Trunk
Availability
1 = Enable
All IP trunks (SIP,
CCIS, or H.323)
must be contiguous.
If any IP trunks are
added to a system
that already has IP
trunks installed, and
the next set of trunks
is not contiguous,
then all IP trunks are
moved to a new set
of contiguous trunk
numbers.
Number of Ports
0: 0 Port
4: 4 Port
8: 8 Port
:
200: 200 Port
Number of IP
0: 0 Port
CCIS Ports
1: 1 Port
2: 2 Port
:
200: 200 Port

10-40 : IP Trunk Availability

Input Data
Issue 10.1
1
Default
0
0
0
2 - 61