NEC Univerge SV8100 Programming Manual page 823

UNIVERGE SV8100
Input Data
Item
No.
31
32
34
35
36
37
38
39
40
41
Note 1:
Note 2:
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
Programming Manual
Item
DTMF Relay Mode
If VoIPU, the systems refers to PRG 84-
06-10 setting.
FAX Relay Mode
Select "2" for FAX Relay to SLT
(Program 15-03-03:special), Trunk and
NetLink.
Refer to Program 84-01-36 through 84-
01-58 for FAX Relay options.
G.722 VAD Mode
Not used by IPLB.
G.722 Jitter Buffer (min)
G.722 Jitter Buffer (average)
G.722 Jitter Buffer (max)
RTP Filter
To avoid incorrect voice pass
connection, this Program checks the
sending side address from received
RTP packet at VoIPDB.
DTMF Level Mode
Used only by IPLB.
DTMF Level High
Used only by IPLB.
DTMF Level Low
Used only by IPLB.
For IPLA, 0~270ms is valid. If set to more than 270ms, then buffer size is 270ms.
For IPLA, 0~160ms is valid. If set to more than 160ms, then buffer size is 160ms.
Conditions
None
Input Data
0 = Disable
1 = RFC2833
2 = VoIPU
0 = Disable
1 = Enable
2 = Each Port Mode
0 = Disable
1 = Enable
0~255ms (Note 2)
0~255ms (Note 2)
0~255ms (Note 2)
0 = Disable
1 = Enable
0 = VoIPU default value
1 = Main soft value
0 = Disable
1 = -33dBm
:
28 = -6dBm
0 = Disable
1 = -33dBm
:
28 = -6dBm
Issue 10.1
Default
1
0
0
30
60
120
1
0
28
28
2 - 787