84-32: Fax Over Ip Codec Setup - NEC Univerge SV8100 Programming Manual

Issue 10.1
Level:
IN
Description
Use Program 84-32: FAX Over IP CODEC Setup to program the CODECs used
when faxing across CCISoIP networks. Note these settings must match in both
systems for faxing across CCISoIP to work.
Input Data
Input Data
Item
No.
2 - 844
Program 84 : Hardware Setup for VoIP
Type
Item
01
FAX CODEC
Set up FAX over IP CODEC
Settings when using CCIS over IP.
If set to 4 [T.38 (UDPTL)], system
does not follow PRG 84-32-02~07.
02
Payload Size
Set up payload size when using
CCIS over IP.
03
Jitter Buffer Mode
Set up Jitter Buffer settings when
using CCIS over IP.
04
Jitter Buffer (min)
Set up minimum Jitter Buffer
settings when using CCIS over IP.
05
Jitter Buffer (average)
Set up average Jitter Buffer
settings when using CCIS over IP.
06
Jitter Buffer (max)
Set up maximum Jitter Buffer
settings when using CCIS over IP.
84-32: FAX Over IP CODEC Setup
1 = CCIS over
2 = SIP Trunk
3 = Not Used
4 = Not Used
Input Data
1 = G.711 a-law
2 = G.711 u-law
3 = G.726
4 = T.38 (UDPTL)
1~4 (10ms base)
1 = Static
2 = Self adjusting
0~300
0~300
0~300
Program 84 : Hardware Setup for VoIP
UNIVERGE SV8100
Default
1
2
1
20
40
80