Fax Over Ip Codec Setup - NEC UNIVERGE SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 84-32 : FAX Over IP CODEC Setup to program the CODECs used
when faxing across CCISoIP networks. Note these settings must match in both
systems for faxing across CCISoIP to work.
Input Data
Item
No.
01
02
03
04
05
06
07
SV8100 Programming Manual
Program 84 : Hardware Setup for VoIP
Item
FAX CODEC
Set up FAX over IP CODEC
Settings when using CCIS over IP.
If set to 4 [T.38 (UDPTL)], system
does not follow PRG 84-32-02~07.
Payload Size
Set up payload size when using
CCIS over IP.
Jitter Buffer Mode
Set up Jitter Buffer settings when
using CCIS over IP.
Jitter Buffer (min)
Set up minimum Jitter Buffer
settings when using CCIS over IP.
Jitter Buffer (average)
Set up average Jitter Buffer
settings when using CCIS over IP.
Jitter Buffer (max)
Set up maximum Jitter Buffer
settings when using CCIS over IP.
RTP Payload Type
Set up RTP Payload type when
settings when using CCIS over IP.
This setting should be used as
default.

84-32 : FAX Over IP CODEC Setup

Input Data
1 = G.711 a-law
2 = G.711 u-law
3 = G.726
4 = T.38 (UDPTL)
1~4 (10ms base)
1 = Static
2 = Self adjusting
0~300
0~300
0~300
96~127
Issue 11.0
Default
2 (US)
1 (Other)
2
1
20
40
80
103
2 - 817