NEC UNIVERGE SV8100 Programming Manual page 357

UNIVERGE SV8100
Item
Item
No.
08
Restriction Table
09 Restriction for
Common Speed Dials
10 Restriction for Group
Speed Dials
11
Intercom Call
Restriction
12 PBX Call Restriction
13 Restriction of Tie
Line Calls
14 Trunk Transfer
Restriction on
Incomplete Dial
15 Common Hold
Restriction on
Incomplete Dial
SV8100 Programming Manual
Input Data Default
1~4 = Table 1, 2, 6~15 = 0
0 = Disable
3 = 1
(None)
4 = 2
5 = 3
0 = Does Not
Restrict
1 = Following
Restriction
Check
0 = Does Not
Restrict
1 = Following
Restriction
Check
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No) 1~6, 8~15 = 0
1 = Enable (Yes)
7 = 1
0 = Disable (No)
1 = Enable (Yes)
0 = Not allow 0 (Not allow)
1 = Allow
0 = Not allow 0 (Not allow)
1 =Allow
Description
Set the tables 1~4 when referring
to the table set up by 21-06-07.
0 Enable/Disable Toll Restriction for
Common Speed Dialing numbers.
If enabled, System Speed Dialing
numbers have the same
restrictions as manually dialed
numbers.
0 Enable/Disable Toll Restriction for
Group Speed Dialing numbers. If
enabled, Group Speed Dialing
numbers have the same
restrictions as manually dialed
numbers.
0
Determine if incoming and
outgoing intercom calls are
allowed.
Set how the system Toll Restricts
calls over PBX trunks. If you
enable PBX Toll Restriction, the
system begins Toll Restriction
after the PBX access code. The
user cannot dial a PBX extension.
If you disable PBX Toll Restriction,
the system only restricts calls that
contain the PBX access code. The
system does not restrict calls to
PBX extensions. Refer to the PBX
compatibility feature. Make sure
Program 21-05-04 (Maximum
Number of Digits Table
Assignment) allows for PBX Toll
Call Dialing (normally 12 digits).
0 Enable/Disable the toll restriction
of the dial set up by 34-08.
If this program is set to 1, you can
transfer the outgoing trunk which
you dialed incompletely.
If this program is set to 1, you can
hold the outgoing trunk which you
dialed in restriction check.
Issue 11.0
Related
Program
21-06-07
34-08
2 - 315